Zi-400 Aircraft Colloidal Cleaner

Corrosion Control

Since 1993 Zi-400 Aircraft Colloidal Cleaner has become an integral component in the corrosion prevention and control program (CPCP) developed by the Royal Australian Air Force for its aircraft fleet. In 1997, Zi-400 Aircraft Colloidal Cleaner was also chosen by the United Space Alliance (NASA’s ground operations arm) for use on the space shuttle fleet. Zi-400 Aircraft Colloidal Cleaner is a fully approved, highly advanced aerospace cleaner, specifically designed to provide corrosion inhibition whilst cleaning. It is cutting edge colloidal technology. It is not a conventional detergent or surfactant based cleaning product.

Cost Effective

Due to Zi-400 Aircraft Colloidal Cleaner being such a highly concentrated product, it may be diluted through a wide range of ratios to suit the particular task at hand. This and the fact that it is physically different to conventional soap or detergents, means that Zi-400 can often replace a number of different cleaning products, reducing inventory, thus making it highly cost effective. These factors can add up to substantial cost savings.

The Zi-400 Aircraft Colloidal Cleaner chemistry makes it rugged enough for cleaning stubborn grime like turbine exhaust stains, yet gentle enough for cleaning carpets, upholstery and plastics.

Due to its formulation it will not remove grease from bearings, bushes or rod ends. Furthermore, not only is Zi-400 non corrosive, the formulation actually has anti-corrosive properties, a unique attribute that no other cleaning product can offer.

Colloidal Technology

Zi-400 uses cutting edge colloidal technology. It is not a conventional detergent or surfactant based cleaning product.

Where can it be used?

Zi-400 Aircraft Colloidal Cleaner is recommended for all aspects of airframe washing and is highly effective for removing exhaust deposits and staining from unpainted and painted surfaces.

What’s more, any aircraft surface that tolerates water, both interior and exterior, such as aluminium, titanium, magnesium, chrome-molly, stainless steel, painted & polished surfaces, fabric, composite, acrylic, plastic, glass, ceramic, leather and carpet can safely be cleaned with Zi-400.

Versatile Uses

It is suitable for any form of application used in aircraft cleaning, from the traditional bucket and brush, cloth or sponge through to foaming wands, spray equipment and dip tanks.

Read more about why people use Zi-400

Agitation of the area is essential.

The use of water at elevated temperatures will usually assist the cleaning action. Apply and allow a dwell or ‘sit’ time to obtain the best results. Read more about how colloidal cleaners work.

No Residue

Unlike surfactant based cleaners Zi-400 leaves no residue or build up on the surface, even with frequent use. Pressure cleaners are not suitable for use on aircraft. Read about the correct way to wash an aircraft.

Sizes

Zi-400 Aircraft Colloidal Cleaner is available in:

• 20 Litre
• 200 Mauser

Zi-400 Aircraft Colloidal Cleaner Suggested Dilution ratios

Zi-400 Aircraft Colloidal Cleaner is a concentrated product which is diluted in water before use. The following dilutions should be used as a reference point and guide when cleaning. You may vary these to suit your particular application, equipment and requirement.

NOTE:
The use of water at accelerated temperatures may assist the cleaning action. Agitation of the area is essential.  For best results, apply and allow a dwell time for the Zi-400 to sit on the surface and loosen the grime.  Do not allow to dry on surface being washed.

These dilutions should be used as a reference point and guide when cleaning and can be applied to all industries.  You may vary these to suit your particular application, equipment and requirement.  Let experience be your guide and do not be afraid to experiment.  Remember, any surface that tolerates water should be safe for use with ZI-400.  If in doubt, spot test a small area first.

Specifications & Approvals

Zi-400Aircraft Colloidal Cleaner has achieved or meets with the following approvals:

• Boeing D6-17487, Revision P (or later) Exterior Cleaning
• Boeing D6-7127, Revision M (or later) Interior Cleaning
• Douglas CSD No.1, Current Revision, Exterior/Interior Cleaning
• AMS 1526B, Exterior Cleaner (Accepted by AIRBUS Industries)
• AMS 1550B, Interior Cleaner (Accepted by AIRBUS Industries)

(All above re-tested December 2004.)

• DEF (Aust) 5570A
• MIL-C-87936A Type 1 Specifications
• Lockheed Georgia Co. STM32-302
• Lockheed Martin (Vought Systems)
• British Aerospace Co T.O.R. 241
• United Space Alliance
• CAA Approval Ref.DR 95/176/EI1
• Pilatus